![]() Finally, place acid-free tape across the back of the mat, covering the entire backside of the fillet.This will reinforce the mat and keep it from bending. Once the fillets are in place, build up the back of the window mat using acid-free foam board, or more matboard to lie flush with the back of the fillet.The fillets should be attached moving around the opening - short side, long side, short side, long side. The protective cover on the double-sided tape is removed, and the correct fillet attached, one side at a time.They will be carefully trimmed to ensure a perfect fit within the opening. The fillet lengths are cut down to be slightly larger than the lengths of the mat or frame opening.A bevel will weaken the edge on which the fillet is attached, and is unnecessary for the display. When applying a fillet to a window mat, the mat opening should be straight-cut, not bevelled.Double-sided tape is applied to the back inside edge of the window mat, or to the lip of the picture frame.Don't forget the fillet will cover another 1/4" to 1" of the artwork, so the frame or mat opening should be made larger as necessary. First, the picture frame is assembled, or window mat is cut, to size.The latter may be available in standard or custom sizes, depending on the provider. Instead, the "rabbet" section of the fillet is above the lip, so the mat or picture frame can sit on top the fillet.ĭepending on the company supplying them, fillets may be sold separately, in long lengths like frame moulding, or cut and already attached to the window mat. Today, fillets may be soft or hard wood, plastic, or metal, and come in as many different finishes and designs as the picture frame itself.įillets sit on top of the artwork, as opposed to providing a lip for the art to sit in, like a picture frame. Traditionally, fillets were constructed from solid wood just like frames, and were usually covered in gold leaf. They are similar to linen liners but can be used both with and without glazing. They are used as additional decoration at the inside edge of frames or window mats, to draw attention to the artwork within. This article discusses the use and purpose of fillets in picture framing.įillets are essentially thin picture frame mouldings that can be used between the frame and the art, or the mat and the art, for added decor.įillets are cut to size and adhered to the back of the window mat or under the picture frame lip.įillets can add a cohesive element, create visual space, or add some extra detail to a plain frame.įillets - also spelled "filet", or called a slip - look like very thin picture frames. They add interest and detail to any picture framing project, and are quite easy to assemble and install. You'll need four pieces - the top and bottom pieces should be the full width of the internal frame size, and the two side pieces should be the height of the internal frame size minus the width of the top and bottom pieces of balsa wood.Contact KeenART Turnaround time Shipping Rush Orders Products & Pricing ->įillets are decorative elements used in picture framing to a number of different ends. Start by marking and cutting your balsa wood to size. If I was framing a larger piece I'd go for more space around it. * Please note that the frame should be larger than the piece you're framing - how much larger is up to you, but I chose a frame that's 1.5cms larger on each side than my painting as the painting is quite small. White Eggshell Paint (or any colour to match to your chosen mount or frame colour)įrame with a rebate to fit your fillets or spacers* It's important to check that it won't stick out past the rebate. Don't be put off by this long list - you probably have at least 3/4 of it already!īalsa wood strip that is the right width to fit the rebate on your chosen frame.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |